Single Mode BiDi SFP+ Fiber Modules is a cost effective way to connect a single network device to a wide variety of fiber cable distances and types.
The primary goal of the transmitter enables the bandwidth of the 10G in order to meet the increasing demand of the industrial Ethernet fiber solution. The deployment distance can be extended to a maximum of 10 kilometers using LC single-mode fiber optic cable.
+ Overview
The SFP Gigabit Ethernet module can be used to connect together switches, servers and fiber modules on a campus or metropolitan area network (MAN), which is packed in a Small Form Pluggable (SFP) metal housing to increase durability, eliminating frequent replacement and maintenance.
It can be installed into Fastcabling Switch and Media Converter products with 10 Gbps SFP+ interface.
For horizontal shorter-length run, the Fastcabling modules are available with single mode fiber to suit your fiber connectivity applications. It can transmit data up to 10KM with 10 Gigabit network speed.
The SFP module is hot-pluggable and hot-swappable that you can remove and install while the server is running. Besides, it features wide range operation temperature from -40℃ to 75℃(-40°F to 167°F), so it can be used in the harsh environment, such as outdoor application.
The Fastcabling SFP module is highly engineered to be robust, arrest high peak ESD currents and perform consistently throughout the lifetime of the component. Good ESD protection typically features extremely fast response time, low operating and clamping voltage, low leakage current, and low capacitance.
+ How it works
1.Select a pair of SFP fiber transceiver that meet your demands of speed, distance, connector type.
2. Insert the SFP fiber transceivers to two SFP slots of any fiber media converter or fiber switch.
3. Connect two SFP fiber transceivers with suitable fiber optic cable, fiber optic signal or electric signal converts.
4. Power the devices at both ends, a complete fiber optic link is done.
Nowadays, more and more people intends to utilize fiber optic link in networking system for the reason that it covers wider range of distance, provides higher bandwidth and comes with less signal interference and so on. Moreover, it even can be accessed easily in some PoE devices, such as PoE fiber switch, which generally equipped with one or two SFP ports. As it is known that PoE fiber devices are electronics, requiring power supply while fiber is plastic or glass material that can’t conduct electric currency to your front-end IP devices. Therefore you can’t connect the fiber optic cable straightly to the fiber ports, because these ports are empty and lack of signal conversion tools. That means you requires tools can help finishing signal conversion. Read more
5 reviews for Single Mode BiDi SFP+ Fiber Modules
Rated 4 out of 5
Burban –
I’m using a NAS as an external hard drive using 10G thanks to this transceiver
Rated 4 out of 5
Channing –
Plugged it in and worked great…I will check to see if I get any errors but so far so good.
Rated 4 out of 5
Geeky32 –
Used to run fiber from an SFP 10 Gigabit switch on the other side of my apartment. Obtained at full speed.
Rated 5 out of 5
Netmanca –
Funktioniert wie angegeben. Fühle mich sicher im SFP-Port.
Burban –
I’m using a NAS as an external hard drive using 10G thanks to this transceiver
Channing –
Plugged it in and worked great…I will check to see if I get any errors but so far so good.
Geeky32 –
Used to run fiber from an SFP 10 Gigabit switch on the other side of my apartment. Obtained at full speed.
Netmanca –
Funktioniert wie angegeben. Fühle mich sicher im SFP-Port.