8 PoE Powered Switch is powerful device with high power budget to receive power and data from back-end PSU and pass through to front-end IP devices.
Expanding network ports for multiple IP powered devices in an easy way. Working with Fastcabling 5720-74 PoE injector or 5543-60 PoE switch, the whole system will provide 71W remaining power. This switch is designed to supply PoE for IP devices deployed in the field where power source is difficult to acquire.
One Cable Network Expansion
One cabling between the main network(PSE) and the switch can expand up to 7 PoE or Ethernet ports for installing multiple IP devices.
Easy to Install
Receive the power from the PoE injector or switch; No need for power source present at the edge; plug-and-play.
71W Power Budget
Working with 95W PoE injector/switch, a maximum of 71W PoE++ passthrough, and supply PoE or non-PoE devices.
Enable 200 meters PoE connection between the IP device and the center switch, extend Ethernet or PoE beyond 100 meters.
Seven 10/100/1000 Mbps PoE RJ45 ports and one gigabit RJ45 PoE Pass through port.
Compatible with IEEE802.3af/at/bt standard, PoE++; receive power and data over the same Ethernet cable; automatic PoE detection on connected PDs.
Comes with wide working temperature range from -20℃ to 70℃, can meet outdoor uses if get waterproof measure.
A: 5541-25 PoE powered switch delivers high power budget up to 71W to meet different demand. The PoE port complies with IEEE802.3at(PoE+) standard. Each PoE port is capable of output maximum power up to 30W.
A: The switch can work under temperature range from -20℃ to 70℃. Perfectly fine in various outdoor environments.
A: Actually not. You can use it to power devieces while the connected devices do not need network.
A: This switch is back comapliant with IEEE 802.3af/at standard,which takes 2 twisted pairs to transmit data and power,it can work with any devices that supports IEEE 802.3af/at standard.