4-Port PoE+ Switch with 2 Uplink Ports


Product#: 5536-10

Ideal for setting up PoE IP system that requires stable network at home or office on a small scale

  tickIn Stock.
tickFree Shipping with $189 Order.
tick100% Satisfaction Guaranteed.

SKU: 5536-10 Category:

4-Port PoE+ Switch with 2 Uplink Ports is a flexible device to transmit adequate power and safe reliable network for HD IP surveillance or WiFi system.

Setting the compact size switch at any place where requires multi-points IP powered devices deployment via simple and fast installation. There’s no need for dedicated AC outlets and extra wire cable, saving money and eliminating tangled cable management.



The PoE switch is designed with 4 PoE ports for supply power and 10/100Mbps Ethernet network, which is the ideal choice for IP surveillance, VoIP phone and wireless service providers on a small scale deployment, such as leading home, SOHO and Workgroup, providing high performance network and stable transmission as well as safe operation.

It has two uplink ports, beside connect to Internet, there is an extra port used to connect to NVR. With a transmission speed of 100Mbps, it ensures high-speed data and video transmission and a reliable connection between the surveillance system and the external network. Through these port, eight PoE + can be optimally used ports.

PoE connection via single Ethernet cable saves cost and time on wire cabling, which allows the users finish installation with simple plug and play. It’s perfect for IP devices that place at the point where is hard to find AC outlet or unreachable, such as wall ceiling.

Compliant with IEEE 802.3at/af PoE+/PoE, the switch supplies up to 30 Watts per port and automatically detects PoE devices and their power class to simplify your infrastructure.

It has intelligent powered device alive check to reduce administrator management burden. Once remote devices are hangs or freezes, that means the PD stops working and it is without response, auto power reset will reboot devices by switch off the power and switch on after automatically.

Communication link detection prevent all the PoE ports of the PoE switch from being active at the same time and the PoE ports can be configured to allow each port to be activated at the interval time. The switch features surge protection and carrier grade electrical protection to protect from various power surges.


How it Works

PoE switch
16 port PoE switch

16-Port PoE+ Switch


8 port PoE switch

8-Port PoE+ Switch


Bullet Camera

H.265 2MP PoE IP Camera with Vari-focal Lens


ptz camera

2MP IR PoE+ PTZ Speed Dome IP Camera


*Click the tag to view the products detail

+ Benefits

  • Standard IEEE802.3 af/at PoE Power
  • Support security power and data for 4 PoE IP devices
  • Plug & Play easy connection
  • High performance fast Ethernet network
  • Compact size provides flexible installation
  • Enhanced surge protection

+ Specification

    PoE standardIEEE802.3af/at
    Networking Interfaces(4) 10/100 Mbps PoE Ports
    (2) 10/100 Mbps uplink Ports
    PoE port1-4
    PoE Total60W
    Power supply65W
    RJ45 PoE power supply Max 32W (Mode A Anode1/2 Cathode 3/6)
    IndicatorPWR、 LNK/ACT、 PoE
    Network media10BASE-T: UTP category 3,4,5 cable(≤300m)
    100BASE-TX: UTP category 5, 5e cable(≤100m)
    MAC Address Table1K, Automatic study, automatic updates
    jumbo frame1536 Bytes
    Packet buffer448K bit
    Transfer ModeStore-and-forward
    Packet forwarding rate0.89Mpps
    Device Dimension140*76.7*28mm
    CertificationsCE, FCC Class A
    Input VoltageAC 100-240V 50/60Hz
    Operating Temperature-0°C ~ 40 °C
    Storage Temperature-40 °C ~ 70 °C
    Operating Humidity10% ~ 90% non-condensing
    Storage Humidity 5% ~ 90% non-condensing
    Surge Protection Differential mode±4KV,Common mode ±6KV
    MTBF >50000 hour
    Electrostatic standard Contact 6KV,air 8KV
  • Click here to open Datasheet in PDF

+ Technical Drawing

+ What is included

  • 1.4-Port PoE+ Switch
  • 2.User Guide


Installation Video


Do you have any questions or concerns?




PoE Networking System Set Up

PoE switches are common devices to build a networking system with PoE for various PDs (powered devices) in home and commercial applications, such as IP cameras, Access points(APs), VoIP phone etc, which especially suit for users who plan to set up network devices in locations that are hard or even impossible to access AC outlets, because PoE technology allows single Ethernet cable to carry sufficient electrical currency that PDs required, saving extra electrical wire lines deployment. Fastcabling PoE switches and solution provide multiple choices on PoE ports and network speed, feature plug and play installation, give great compatibility on IEEE 802.3 at/af compliant devices with up to 30W power output. We dedicate to help users finish network deployment in an easy, flexible but secure way. Read more


Things you should know before using Power over Ethernet (PoE)

Technology has surely change the way we live our life, information are being easily transmit, the powered devices that can only play a signal role in our daily lives, such as the computer, smart television or mobile devices can now do more things than before. Why? Because of the power of networks. And this brings us to our main topic today, the Power over Ethernet(POE) technology. In recent years, Power over Ethernet is an ever-growing phenomenon, and as we can see for ourselves its advancement is going on a stable rate. Read more



There are no reviews yet.

Be the first to review “4-Port PoE+ Switch with 2 Uplink Ports”