200m Passive Power over Ethernet
To install a 24V passive PoE device 200m away, you will need a PoE extender and a 24V passive PoE converter. Start by connecting the 24V passive PoE converter to the device you want to power up. Next, connect one end of the Ethernet cable to the PoE converter and the other end to the PoE extender. Then, connect the PoE extender to your main router using another Ethernet cable. Make sure that the PoE extender is located in a place that is close enough to the device so that the distance between the device and the extender does not exceed 200m. Once everything is connected, power on the main router and the device, and the 24V passive PoE device should be operational within minutes.