Networking Solutions
Long Range PoE
- 200m Away IP Camera from PoE NVR
- IP Camera over 100m from PoE Switch
- 500m PoE Extender for IP Camera
- 500m PoE Switch for IP Camera
- 200m PoE Extender with 2 Outputs
- Run 500m Cat5e b/w 2 PoE Switches
- Surge Protection for Long Range PoE
- Two PoE Switches Apart from 100m
- 200m Mesh Using 2-Port PoE Extender
- 200m PoE++ Extension for 802.3bt WAP
- 500m PoE+ Network for High Power WAP
- 200m Long Range PoE for WAP
- Run 7 IP Cameras on Existing Cat5e
- Expand Network via PoE Passthrough
- Multiple IP Camera/WAP over 100m
- 300m PoE+ for High Power PTZ Camera
- 200m High Power PoE++ with 2 Outputs
- 300m High Power PoE+ thru PoE Switch
- 200m PoE+ for High Power WAP
- Show all articles ( 9 ) Collapse Articles
Fiber Optic Network
- 500m Point-to-Point Fiber Internet
- 20KM Outdoor P2P Fiber Internet
- Point to Point 10G/2.5G/1G Fiber LAN
- 10G LAN b/w 2 Fiber Switches
- 40G Fiber LAN over Fiber Switch
- 10G Fiber & PoE for 2.5G WiFi AP
- 20KM Max. Outdoor P2P Fiber Internet
- P2P Fiber Optic Link with 8 PoE Out
- 8 Fiber Links from One Fiber Switch
- PoE Network Using 2 Fiber Switches
- Industrial Fiber Switch with 90W PoE
- Straight Line ERPS Network over Fiber
- Peripheral ERPS Network over Fiber
- P2P Outdoor Power over Fiber Network
- Power over Fiber with 8 PoE Out
- Easy Fiber Optic Termination
- PoE over Fiber with Easy Termination
- Show all articles ( 7 ) Collapse Articles
Wireless LAN
PoE Camera System
SMB Network
PoE Network
- Add PoE to Router with PoE Injector
- Outdoor Battery-Powered 24V-48V PoE
- 60W Outdoor PoE Injector AC Plug
- 10G PoE Network over Cat6(8 PoE Out)
- 60W PoE++ Splitter for Non-PoE
- PoE Networking: Unmanaged PoE Switch
- Add PoE Switch to PoE NVR System
- PoE Networking: PoE Switch with SFP
- 2 PoE Switches on the Same Cat6
- Run 500m Cat5e b/w 2 PoE Switches
- Managed PoE Switch for SMB: VLAN
- Connect 24V PoE to 48V Standard PoE
- 200m Passive Power over Ethernet
- 90W PoE++ for High Power PTZ Camera
- 60W PoE++ Splitter for Non-PoE
- BT PoE Switch for High Power PTZ WAP
- Outdoor PoE Switch with 90W Outputs
- Industrial PoE Switch with 90W Outputs
- L2 Managed PoE Switch with 90W Out
- 90W PoE Passthrough for 7 IP Devices
- 200m High Power PoE+ with 2 Outputs
- Show all articles ( 11 ) Collapse Articles
Outdoor & Industrial
Smart Home
Industrial Automation
< All Topics
Print
200m Away IP Camera from PoE NVR
Posted
Updated
ByFC
4.5 out of 5 stars
1 rating
5 Stars | 0% | |
4 Stars | 100% | |
3 Stars | 0% | |
2 Stars | 0% | |
1 Stars | 0% |
The biggest benefit of using a PoE NVR in a CCTV system is its unbeatable affordable price. You can simply run one Cat5e/6 cable from the NVR, and it will provide both power and data to the PoE-based IP camera over a single network cable. But standard PoE is limited to a maximum distance of 100m. To install cameras at greater distances, a PoE extender must be deployed to extend the range of your network and PoE. The PoE extender can be plugged directly into the NVR, but can only connect one camera. But depending on the cable type, power loss, data rate and power required, the range could vary.

Case Study
Was this article helpful?
4.5 out of 5 stars
1 rating
5 Stars | 0% | |
4 Stars | 100% | |
3 Stars | 0% | |
2 Stars | 0% | |
1 Stars | 0% |